Harris Auction PO Box 11317, Prescott, Arizona 86304 928-778-3240
CLICK TO RETURN TO OUR MAIN WEBSITE - WWW.HARRISAUCTION.BIZ
FORD 1841-S INDUSTRIAL TRACTOR 
(Pick Up SAT or Special Arrangement - Delivery Available)
- Sold Winning Bid: $2,851.01
- 39 Bid(s) View Bid History
- Lot # TER005
- System ID # 15071135
- End Date
- Start Date
Ford 1841 Industrial Tractor
Wheel Drive: 4x2 2WD
Production Years: 1957 to 1960
Tractor Type: Industrial tractor
Operator Station: Open Cabin
Weight: 3,800 lbs
Mfg: USA
S/N: 54052
Operational Condition: Starts, Runs, Drives
Hydraulics for the 3-point hitch lift operates sporadically (may need repair or service)
Rear tires have good tread, PTO operational
SPECS
Hyd: It had a front mounted pump and separate reservoir for oil in the nose
Has a massive sub frame for optional backhoe or loader attachment (not provided)
Dimensions
Width: 69.2 inches
Length: 128 inches
Wheels
Wheelbase: 81.5 inches
Industrial Front Tires: 7.50x16
Industrial Rear Tires: 12x28
Engine
Engine Rated RPM: 2325 RPM
Engine Firing Order: 1-2-4-3
Engine Size: 172 ci
Engine Cylinders- 4 w/ 8 valves
Fuel: Gasoline
Engine Hp: 56.3 hp at 2200 (rpm),
Engine Torque: 140.4 lb-ft at 1400 (rpm)
Bore/Stroke: 3.90x3.60 inches
Compression: 7.5:1 or 16.8:1 see manual
Fuel Tank Capacity: 17 gal
Oil Capacity: 5 or 6 qts verify with manual
Coolant Capacity: 15 qts
Engine Sparkplug: 14MM
Sparkplug gap: 0.027 in
Point Gap: 0.025 in
Intake valve clearance: 0.015 inches (hot)
Exhaust valve clearance: 0.015 inches (hot)
Transmission
Gears: 4 forward and 1 reverse
Transmission: Unsynchronized Manual Reversing Shuttle (Tractor must be stopped, and clutch used, to shift gears)
Oil type: SAE 80
Braking system: Differential Mechanical Shoe
Electrical Specs
Number of Batteries: 1
Battery voltage: 6V spec
Engine starter volts: 12 V
Battery Amps: 80 amps
Electric ground: positive
Electric charging system: generator
Electric charging Amps: 20 amps
Hydraulic Specs
Steering flow rate: 8 gpm
Hydraulic tank capacity: 2 gal
Hydraulic pressure: 2000 psi
Hydraulic max flow: 4 gpm
Power take-off (PTO) specs
Rear PTO system: transmission
Rear PTO RPM 540 (rpm)
Tractor Shop Manual:
Included, Reference for any errors or omissions
Research:
The Ford Model 1841 is a heavy industrial model in the 1801 Industrial tractor series.
Manufactured in the US from 1958 to 1960. Many replacement parts are utilized in the 801 agricultural series tractors that were made at the same time. Some differences from the ag chassis model were the heavier duty single piece front axle that was designed for loader work and the nose of the 1801 series models had a cast iron grill surround vs. sheet metal on the 841. The replacement for the 1801 series was the 4000 Industrial series that was made from 1961-1964, and they shared a lot of parts in common with the 1801 series as well. The 4 in the second position of the model number just means that it had the 4 speed transmission and non-live PTO. The -S at the end means that it came from the factory with a Sherman Auxiliary transmission, which could have been either a combo step-up/step-down or a reverser, with the reverser being the most common on the Industrial models and the combo being most common on the ag models.